For best results, treat your faucet like you would your face: use a mild & gentle cleanser when cleaning, rinsing thoroughly with a soft cloth. Delicately buff and wipe dry. To safeguard the integrity of the finish, avoid cleaners containing ammonia, bleach, acid, or abrasives.

Routine cleaning with hot water and soap is important. For mild stains or light scratches, we suggest a mildly aggressive cleaner such as Shiny Sinks Plus® or Flitz®. To remove stubborn stains Comet®, Ajax®, BonAmi® or BarKeeper’s Friend® work well but always rub in the direction of the grain. Always rinse thoroughly and wipe dry after cleaning.

For daily cleaning, just wet and squeeze some dish soap onto the soft side of a sponge. Wipe the Silgranit surface in small, circular motions. Rinse with clean water and dry with a microfiber cloth.

Stubborn stains can be removed by pouring a little warm vinegar or vinegar-based cleaner into the sink and allowing it to sit for a few minutes. Rinse with clean water and dry. Depending on the severity of the food stain, use an equal-parts bleach water solution or dishwasher tablet. Allow the solution to sit for an hour and then wipe clean and dry. DO NOT use strong abrasive cleaners, metal scrub pads or steel wool. These will scratch and dull the surface of the sink.

Close the sink drain and distribute the liquid/gel laundry detergent evenly onto the sink surface. Fill the sink with hot water (heated up to 60°C / 140°F). Leave it to work at least 2 hours or ideally overnight. Drain the solution, rinse with clean water and dry with a microfiber cloth. This should be performed once or twice a year.

After each use, rinse thoroughly and use a soft cloth to delicately wipe the product dry.

To safeguard the integrity of the finish, avoid cleaners containing ammonia, bleach, acid, or abrasives.

After each use, rinse thoroughly and use a soft cloth to delicately wipe the product dry.

When necessary, you may use soft abrasive cleaners on Luxart® Vitreous China. However, it’s crucial to avoid strong abrasive cleaners as they can potentially scratch and dull the surface.

Use toilet bowl cleaners exclusively on the inside of your toilet bowl. The targeted approach ensures effective cleaning without damage to the exterior surfaces. In the event of any splashes of cleaner solutions on plastic or plated surfaces, promptly wipe them away. This immediate cleanup helps prevent any potential damage.

Refrain from using in-tank toilet cleaners on Luxart® Vitreous China fixtures, as they have the potential to cause damage to the flush valve or other working parts. Care Tip: Consistency is key—regular, gentle cleaning helps prevent the accumulation of mineral deposits and preserves both the aesthetic appeal and functionality of these premium plumbing fixtures.

Always use warm water and a mild liquid cleanser. Simply wipe surfaces and rinse completely with water immediately after cleaning. Test all products in an inconspicuous location before applying for the first time and avoid any abrasive instruments or cleaners.

Keep ammonia, nail polish remover or bleach away as they may scratch the tub’s stone surface or dull its natural sheen.

Always use warm water and a mild liquid cleanser. Simply wipe surfaces and rinse completely with water immediately after cleaning. Test all products in an inconspicuous location before applying for the first time and avoid any abrasive instruments or cleaners.

Keep ammonia, nail polish remover or bleach away as they may scratch the tub’s stone surface or dull its natural sheen.

Swiftly address spills on your Luxart vanities by gently blotting them with a soft, damp cloth. • Shield wood surfaces from direct sunlight, extreme heat, or excessive moisture to preserve the integrity of your Luxart® vanities. • Keep your Luxart vanities looking their best by regularly dusting with a soft cloth, following the direction of the grain • Maintain the natural allure of the wood by using only products specifically designed for cleaning, steering clear of oily polishes, waxes, or products containing silicone.

Dust the vanity frequently with a clean, soft, dry, lint-free cloth, as well as polish it on a regular basis. Clean the surface by rubbing in the direction of the grain. Use furniture cleaners or polishes that do not contain silicone cleaners or waxes. Clean up excess water and spills immediately. Use a blotting rather than a wiping action. Water left over for a long period of time will cause white spots in the finish.

Marble / Granite should be washed or cleaned regularly with fresh warm water and a non-abrasive clean cloth. Using a nonabrasive, neutral (pH balanced) cleaner will help remove dirt and grime, but it is recommended to first try warm water only.

Marble / Granite top has been sealed. The sealer acts as a stain inhibitor and prevents most stains and soil from being absorbed into the porous surface, but it is NOT a guarantee against staining. All spills should be cleaned immediately. Marble / Granite is porous and easily stained. Wipe off anything spilled on it immediately. Avoid contact with all oils and petroleum-based products, as well as  acid or caustic products such as vinegar, citrus or fruit juices, soda, chlorine, and nail polish remover. 

Consider resealing annually with a quality marble/granite sealer, available at most retail home supply stores. Follow the instructions on the sealer container for proper application and frequency of use.

Placing protective pads on the bottom of any heavy objects will help prevent scratching of the marble / granite surface. Periodically rotate accessories on marble/granite so that they don't sit in the same spot for an extended period of time.

Avoid using abrasive cleaners. Clean regularly with non-abrasive cleansers and non-scratching sponges. Wash sink with warm water, mild detergent and a damp cloth, or soft sponge. Rinse thoroughly using clean warm water.  Avoid using abrasive cleaners.